Archive for November, 2008
Thursday, November 27th, 2008
A skid steer of Bobcat is a really flexible piece of equipment and if you have the correct skid steer attachment, then there is a great deal of different things that you are able to do with them. The angle broom is a very effective skid steer attachment, particularly if you are attempting to keep a site clean but don’t prefer the expense of employing a full size road sweeper. A skid steer is capable to do work in limited spaces and the angle broom skid steer attachment can also be utilized to keep every bit of the site clean, contrary to a regular road sweeper which is limited as to where it can go because of its size. There is also a water kit skid steer attachment available.
The brush cutter skid steer attachment is very useful if you might have to clear areas of brush. It is a very powerful saw that could quickly clear areas that are overgrown. This skid steer attachment also has a steel deflector as a safety attachment so that the operator is protected from the blades. The brush cutter skid steer attachment is also very useful for cutting fire breaks and clearing field edges.
A very useful skid steer attachment is the digger. This can be attached to the front of the skid steer and used to dig and move large quantities of earth or gravel or rocks. The digger skid steer attachment can also remove tree roots and loosen soil that is too hard to work. Using a skid steer attachment to do your digging can let you get a lot more work done and help you to finish jobs quicker. This is undoubtedly one of the most verstile of the skid steer attachment and will be useful to most people.
Another very good skid steer attachment is the bucket. This means that you can carry much larger quantities and make fewer journeys to move the same amount of stuff. Saving time like this can help to increase profitability and allow you to get the job done more quickly. If you get the right one for your needs then a skid steer attachment can make a real difference to the way that you work. And the more time you save, more that you can do and the more money you make. There are a great many skid steer attachments that can make a difference to the way that you work and they can mean that you can work quicker and more effectively.
Posted in skid steer loader | No Comments »
Monday, November 24th, 2008
Every construction work must have longevity and dependability, so must the equipments used for the purpose. The equipments should be ready to face any challenge that pops up during the course of a project. All the natural restriction, the technical problems or the human errors must be tolerated by these machineries.
Earning good profit from the investment must be the top priority of each and every business organization. And this is what heavy machineries should do - provide effectiveness together along with longevity. One must always be wary of cheap equipment which never last long and turn whatever investment that has been made on it into a complete waste. This fortifies the reason for buying good and reliable machinery and equipments.
But good machinery in today?s world is very hard to find and even harder is finding a safe way of transporting them. Since there are a very few countries which manufacture good and reliable heavy equipments, there demand is thus very high in the world market. Only a handful of Asian and western countries like China, India and south European countries produce such equipments.
The drilling and the mining companies are the major consumers of such heavy machinery. Both these industries require machinery which can with stand the test of nature and deliver the goods. With companies like the Caterpillar, using equipments like cranes, backhoes, loaders, compactors and many other heavy equipments the demand for such products is growing even more.
Mining and farming are the two industries which employ more than half of the world?s population. To sustain such profitable industries it is essential to maintain the consistent production of good and reliable machinery. As the industries grow bigger the number of lives at stake also increases. Therefore, it is the responsibility of the manufacturers to build monsters that saves life and not threatens it.
Posted in heavy equipments | No Comments »
Sunday, November 23rd, 2008
In these days, being practical is a must. This is the reason why most of the independent contractors prefer to rent construction equipment instead of buying their own. Most of the contractors tend to believe that by following this practice they are already saving themselves a good amount of sum.
Apart from that reason, these contractors are also avoiding several risks, which are obtainable when they buy their own, by renting construction equipment. For independent contractors, purchasing their own brand new heavy equipment can be risky since they don’t have a sufficient amount to spend on the machine. In addition, purchasing brand new construction equipment may also require an ample time to regain the investment.
The good thing now is that small or independent contractors no longer need to involve into a great risk just to own construction equipment. This time, another alternative is offered; instead of buying a brand new crane, motor grader, compactor, trailer, loader, lift, scraper, blackhoe loader, or any other variety of heavy equipment—small or independent contractors may prefer buying used construction equipment.
This alternative is a good way to own construction equipment, especially for the contractors who do not have enough budgets to buy a brand new one. There is totally no harm in preferring to this alternative. If one will carefully think, opting to used construction equipment is a more practical choice than buying brand new machines because of their too expensive costs.
Sure, there are also risks in buying second-hand machines. However, by simply knowing the exact machines to purchase and by simply knowing what to inspect from used construction equipment; the possible risks can be completely avoided. To further ensure the reliability of the used construction equipment, the following inspection tips can be helpful:
1. Inspect for minor damages on the machine.
Check the error-indicators at the front panel. Also, do not forget to note if there are any missing rear-panel that interconnect cables. You may also see if the CRT displays are blurry. Minor damages are given when buying used machine; however, keep in mind that this damages will not risk the safety of the person who will maneuver the machine.
2. Test drive the machine before finally buying
If there is one mistake contractors can commit when buying used machines, that is the failure to test drive the equipment. Sure, a careful visual inspection of the machine is needed. But doing this alone can result to inaccurate findings. To acquire a reliable inspection, the machine needs to be tried out by the buyer himself.
3. Do not be deceived by a newly paint construction equipment
Remember, there are some sellers who will make the best ways to cover-up the flaws of the equipment they sell with a new paint. But if cleverness will be applied, this form of deception can be discovered by looking at bottom of the vehicle or by inspecting the internal parts of the machine.
When buying used construction equipment, it is better to order from an established dealer. Unlike other sellers, dealers can give warranties to grant the buyer an ample time to test the usability of the machine.
Posted in heavy equipments | No Comments »
Tuesday, November 18th, 2008
If you have built a site-built home before, you are not likely familiar with what a set crew does or why a crane operator is important. These facets are unique to the modular home industry; and they are extremely important. The set crew is important in placing the modules onto the foundation and securing them into place accurately. And without an expert crane operator, there is no way to lift the modules off the tractor trailer truck and onto your building site.
Set crews can be provided by the equipment manufacturers like caterpillar equipments, john deere equipments, case equipments, komatsu equipments etc. or can be subcontracted by your builder. Either is fine as long as they have experience with modular homes. However, often there may be some cost savings by hiring them directly or through your builder. Most crane operators are independent contractors, although manufacturers often have a list of operators they use regularly in your area. Regardless who recommends them, on the building site they are under the supervision of your general contractor.
Upon arrival of the set crew, the set crew chief inspects the foundation for manufacturer’s compliance and for any defects. If there are any problems that cause further delays in the setting of your home, there are additional hours of time charged to you for the set crew and crane operator to wait or reschedule. If this is due to your builder’s error, it is reasonable for him to pay these extra charges. Once inspected, the set crew guides and secures each module into place and removes transportation material from each module.
Once the modules are in place, the floors are leveled and bolted to the floor centers. In addition, the set crew places the steel columns for support in the crawl space or basement as outlined by the manufacturer. The set crew also sprays insulation in the perimeter walls and “marriage” walls where two modules come together to ensure good protection from the elements. And lastly, the roof system is attached and made flush to the home making it weather-proof. By the end of the process, the modular assembly is completed and protected from the outside.
The crane operator should be experienced in placing modular homes so that proper attachments to the modules do not damage the sections inadvertently. Set crews of course assist with this, but it helps to have a knowledgeable crane operator. Ideally, the crane operator has already surveyed your site prior to the arrival of the modular units and knows exactly where he can set up the crane. The terrain and access should be cleared as part of your excavation to allow enough room for the crane to arrive and locate itself for your modular home placement.
Most “sets” take either one or two days to complete depending on the home’s size and complexity of design. Because the modular must be unwrapped from transport and connected together while exposed, weather can influence the assembly. It is the set crews’ responsibility along with your builder’s role to protect your home during assembly from the weather. But assuming a good forecast, the modular home set usually proceeds quickly and smoothly. By the time the set crew leaves, your home looks as if it was built on-site practically overnight.
Posted in heavy equipments | No Comments »
Sunday, November 16th, 2008
Dump Truck Equipment Leasing may fall under the more general leasing category of Heavy Equipment Leasing (meaning, dump trucks are classified as heavy equipment like bulldozers, backhoes, and excavators) or Commercial Equipment Leasing. The numbers show that more than $3 billion in construction equipment (like dump trucks) are leased annually by US companies alone. Why pursue Dump Truck Equipment Leasing?
Some companies opt for Dump Truck Equipment Leasing because they are trying to expand the business and need their existing cash flow for this. Others may choose Dump Truck Equipment Leasing because their existing equipment suddenly failed to function (due perhaps to old age or defects) so they need functional equipment quickly to keep operating. Dump Truck Equipment Leasing is also good for companies that want to gain a financial edge over their business rivals by being able to reap savings thru leasing equipment (as opposed to buying.) Dump Truck Equipment Leasing would probably appeal to contractors in the construction business that will always need dump trucks.
If you get lucky or are just plain smart about choosing a lender, you might be able to get a Dump Truck Equipment Leasing arrangement customized to your business situation. This is very important because businesses (even those in the same industry) may experience different business cycles, and cash flow patterns, while company owners may have different ideas of what constitutes as a sufficient budget. Construction projects are sometimes seasonal in nature, so you need a Dump Truck Equipment Leasing arrangement which can give you the flexibility of adjusting payments to the months when business is peaking and you can afford the payments on the Dump Truck Equipment Leasing arrangement.
Some lenders may offer a very quick processing time (maybe even as fast as 24 hours sometimes) which gives company owners who are in a hurry an advantage for acquiring their dump trucks quickly. If you have the right documentation on hand, you could find yourself signing your Dump Truck Equipment Leasing contract fairly soon after submitting the leasing requirements.
Be sure though that the leasing options the Dump Truck Equipment Leasing arrangement you enter into has the right provisions you were seeking. For instance, if you are expecting to purchase the dump truck after the lease term has been completed, look carefully through the contract to make sure that that stipulation is there.
Also, verify with your company accountant if your corporate income stands to gain via deductions from such a Dump Truck Equipment Leasing arrangement. This would probably be dependent on some tax laws or business tax conditions that only accountants may be updated about.
Posted in heavy equipments | Comments Off
Wednesday, November 12th, 2008
When you think of construction equipment loaders are what normally cometo mind. Loaders are considered tractors with the bucket on the front of the tractor and the engine on the back as a counter weight for thework. Unlike excavators most loaders use wheels rather than tracks. The types of loaders and uses are listed below.
Front end Loader: This type of loader is also called a bucket loader orscoop loader because it has a wide square bucket that tilts to capture the dirt or to dig out an area. The bucker is a removable attachmentso you can also use it as a forklift.
You can also use a clamshelltype of bucket that opens to grab whatever you are working on in its jaws.
Loaders are used for snow removal, dirt removal, farming, andconstruction sites.
Skid and Track Loaders: A skid loader is a smaller loader than theaforementioned equipment. Skid loaders use 4 wheels rather than tracks, but they are similar to the mini excavator in design with a hydrauliclift and bucket on the front of the equipment. The difference is where the life arms are positioned. They are behind the driver’s shoulders rather than more forward of the cab.
Backhoe Loader: This type of loader combines two pieces of equipment into one. First off you have the traditional loader with the front-end bucket and the rear of the tractor has a backhoe. Inside the seat swivels so the operate can see what he or she is doing when operating the backhoe portion. When using the backhoe there are hydraulic stabilizers the operator will place on the ground in order to lift it off the ground a bit.
Loaders are very similar to excavators, but they each have their own uses. Most loaders are for the removal of debris or lifting rather than digging.
Posted in heavy equipments | No Comments »
Monday, November 10th, 2008
Excavators are heavy equipment used in civil engineering and surface mining. An excavator, also called a 360-degree excavator or digger, sometimes abbreviated simply to a 360, is an engineering vehicle consisting of a backhoe and cab mounted on a pivot (turntable is a more apt description) atop an undercarriage with tracks or wheels. The term excavator is sometimes used as a general term for any piece of digging equipment.
Roles of Excavators
Excavators are used in many roles:
1- Digging of trenches, holes, foundations
2- Demolition
3- General grading/landscaping
4- Heavy lift, e.g. lifting and placing of pipes
5- River dredging
6- Mining, especially, but not only open-pit mining
7- Brush cutting with hydraulic attachments
Varieties of Excavators
Excavators for sale come in a wide variety of sizes. The smaller ones are called a mini-excavator or compact excavator. One manufacturer’s largest model weighs 84,980 kg (187,360 lb) and has a maximum bucket size of 4.5 m³ (5.9 yd³). The same manufacturer’s smallest mini-excavator weighs 1470 kg (3240 lb), has a maximum bucket size of 0.036 m³ (0.048 yd³) and the width of its tracks can be adjusted to 89 cm (35 inches). Another company makes a mini excavator that will fit through a doorway with tracks that can be adjusted to only 70 cm (28 inches) wide.
Examples of Excavators
1- Compact excavator
A compact hydraulic excavator is a tracked or wheeled vehicle with an approximate operating weight of 6 metric tons (13,228 lbs). It generally includes a standard backfill blade and features independent boom swing. The compact hydraulic excavator is also referred to as a mini excavator.
2- Dragline excavator
Dragline excavation systems are heavy equipment used in civil engineering and surface mining. In civil engineering the smaller types are used for road and port construction. The larger types are used in strip-mining operations to extract coal and these are amongst the largest mobile equipment (not water-borne), and weigh in the vinicity of 2000 metric tonnes, though specimens weighing up to 13,000 metric tonnes have also been constructed.
3- Bucket-wheel excavator
Bucket-wheel excavators are heavy equipment used in surface mining and civil engineering. The excavation component itself is a large rotating wheel mounted on an arm or boom. On the outer edge of the wheel is a series of scoops or buckets. As the wheel turns, the buckets remove soil or rock from the target area and carry it around to the backside of the wheel, where it falls onto a conveyor, which carries it up the arm toward the main body of the excavator. Additional conveyors then may carry it further; in some cases, several long conveyors are placed end-to-end, each supported by a large vehicular base.
Posted in heavy equipments | No Comments »
Sunday, November 9th, 2008
With all the different skid steer manufacturers, like Mustang, Caterpillar, Bobcat, etc. you may find yourself wondering what is the best route to go. Here are some things you might want to consider when buying your next used skid steer for sale.
You first will need to decide whether your needs would be filled by a used unit or if you are at a point that a new unit would be best suitable for your needs, secondly you will need to determine the proper size machine for your application, depending on the type work you do, the largest or highest horsepower machine isn’t always the most efficient machine.
You will also need to decide if you were going to set a budget to spend or if you are going to be financing this unit. If you intend to purchase a unit outright, you will need to set your budget realistically. Some of the aggravation may stem from not being able to find a machine in the size range that also fit in the price range you are looking to spend. When shopping for a used unit, you must really pay attention to the unit, sometimes folks will let the glitter blind them, a machine with the best aesthetic value may not always be the best mechanical value. You need to look past shiny paint and new tires, you should do a complete evaluation on the machine, key points to check are as listed below.
1. Check for wear on key hinge point of the machine. Check for abnormal play in pinned joints on the boom lift arm. Check the bucket hinge pins and all bucket and lift cylinder pinned joints, always be sure to check both ends of the hydraulic cylinder ends.
2. Check for broken welds or cracks on structural components of the machine. You will want to inspect the boom lift arm, axle tubes and housings, check around hydraulic cylinder pinned joints.
3. Check for excessive oil or fuel leaks. Look over engine compartment, if accessible check under the cab of the unit as well. Don’t count on finding a used machine that is perfectly dry, but you don’t want oil standing in the belly of the unit either. Also keep in mind that just because the a unit has an oil leak doesn’t mean the unit has problems, it can be as simple as a lose hose fitting, or a failed
4. Check the steering and drivability of the machine. This could be one of the more important parts of the inspection, due to the nature of the problem these can be a more expensive fix and worse, it could be a safety issue as well. Drive the unit fully engaged forward, check that the machine tracks straight.
5. Check for engine wear. Keep in mind most skid steer loaders are powered by diesel engines, much different than conventional gasoline engine. Diesel engines are much louder than gasoline engines, they have a noticeable clatter at lower rpm’s.
6. Lastly, check the overall condition of the machine. This step of the evaluation is important in the sense that you will want a machine that looks professional and you will base a portion of your decision off your findings from this step. If you do purchase a used skid steer, if the paint and decals show a lot of wear, I would highly recommend a good touch up to the paint and replace the decals. This is usually inexpensive and will give your machine a better aesthetic value, especially important if you are a contractor, You want customers to feel confident in the equipment your using to complete their projects.
Posted in skid steer loader | No Comments »
Friday, November 7th, 2008
Heavy machineries are those equipments, which are concerned with large projects. These equipments help to carry out those works that would have been very dangerous and strenuous to perform without big machinery. With the hype of technology taking the world by sweeps, heavy machinery tends to be really efficient and outlast past models. Not only are there durable models but technically sound models that do a perfect job for you.
Heavy machinery should not be operated without the assistance of a licensed controller. They will have special knowledge concerning the running and maintenance of the heavy machinery so that there are no unnecessary accidents or disasters. Even the heavy machinery operators keep the construction sites safe by taking proper care of the heavy machinery. However, rented heavy machinery in affordable prices is also offered for carrying out required constructions.
Types of heavy machinery
Heavy machinery is always used for large scale manufacturing and construction work. The range of machineries include tractors, wheel loaders, track hoes, backhoes, payloaders, dozers, graders, dump trucks, excavators, logging equipments, skidders, skid steers, fellabunchers, freightliner trucks, log loaders, setout trucks, tractor trailers, slashers, low boy trailers, drop deck trailers, flat bed trailers, woodstar Harvester and others.
Almost all the heavy machineries have several parts like blades, backhoes, axle, heads, starters, hoods, radiators, engines, hoses, valves, multiple tanks, bud wheels, seals, clutches, pressure plates, steel frames, chrome bumper, heated mirrors, chrome exhaust, air horns and front/back seats.
Benefits of heavy machinery
The heavy machineries are very advantageous for people using it. Equipped with different modern parts, the machineries can do real fast work. They are durable and flexible. The flexibility in heavy machineries do not mean that they can be transferred from one place to another, but it means that they can used for multiple purposes at the same time. While the small machineries are often lightweight, the heavy machineries are quite heavy and should be installed at a proper place for efficient working systems.
Safety of heavy machinery
The heavy machineries perform a variety of tasks: construction, light transportation of building materials, small demolitions, digging holes, breaking asphalt, paving roads and powering building equipments. But the main thing in using heavy machinery is the safety factor. The heavy machineries should be operated by people who are well conversed in machinery parts and their functions. They should know about the dangers associated and the ways to avoid such situations. Others using the heavy machineries should be aware of different uses of the equipments.
Once you know more about the uses of the different heavy machineries you will be able to use them better and yield efficient results.
Posted in heavy equipments | Comments Off
Thursday, November 6th, 2008
Whether it’s a forklift, backhoe or an even more complicated piece of machinery, heavy equipment isn’t something to be used by those who don’t know what they’re doing. These machines are meant to get a job done and get it done correctly and efficiently, but they can be dangerous in unknowing hands. That’s why so many turn to heavy equipment training to ensure proper handling and safety. And, in most cases, training is required to use a particular machine, or at least preferred by employers.
For those job hunting, it’s a fact the construction industry itself is pretty darn solid. It’s generally one of the country’s most booming industries on a year in and year out basis. Those who can operate heavy equipment and do it safely are in high demand. The work can include jobs in private industry, government and even in a person’s own personal businesses. With the proper training, the options are many and the chances for high paying jobs are quite high, too.
The field opens a lot of doors for potential workers as well. This is good for those who don’t know where they want to settle down, or prefer the options that come with a job that’s open just about anywhere.
Training for heavy equipment takes time and lengths will vary depending on the school in question. Getting training, however, is vital not only for good employment opportunities, but also to ensure personal safety. These machines are not like a child’s Tonka toy.
Training before touching a piece of heavy machinery is important for the following reasons:
* There are many different heavy machines. Getting training enables a worker to understand them all and also appreciate the nuances of the difference pieces of equipment.
* Safety. By going through a good training program, a potential worker will be apprised of the different safety measures that must be taken on different pieces of machinery. Even a simple forklift can be dangerous if not operated correctly, in accordance with proper procedures.
* Employability. Often times, the higher paying jobs (or any job) will require training before they’ll even talk to an operator. Proper schooling in the different machines opens a lot of doors.
* Mobility. Those who have training from nationally recognized schools will also generally receive job-placement assistance. Oftentimes this extends long after graduation. So, if a job is needed in a new location, the school can work to help make sure you find one.
If a good job with lots of possibilities is a goal, heavy equipment operating may be the way to go. However, heavy machinery is not like a simple automobile. These machines are meant to do serious work and they have their own subtleties that must be learned and mastered before an operator is considered safe in the driver’s seat.
Posted in heavy equipments | No Comments »
